Cisco E4200

The Cisco E4200 lets you access the Internet via a wireless connection or through one of its four-switched Gigabit Ethernet ports. With the built-in Storage Link, you can easily add gigabytes of storage space onto your network using USB 2.0 hard drives, or plug in a USB flash disk to access your portable data files. The Cisco E4200‘s built-in media server streams music, video and photos from an attached storage device to any UPnP-compatible media adapter or player.

Hot Router like this tends to SELL OUT VERY QUICKLY
If this is a MUST HAVE product, be sure to ORDER NOW to avoid disappointment!

Cisco E4200 – US FREE SHIPPING & LOWEST PRICE – ORDER HERE !
(Limited Time and Stock)

Cisco E4200 Security Features

Various security features help protect your data and your privacy while you are online. Security features include:

• Wi-Fi Protected Access 2 (WPA2) security, which encrypts data on your wireless network;

• Stateful Packet Inspection (SPI) firewall to help block unauthorized access to your router;

• Network Address Translation (NAT) technology, which enhances network protection by allowing your computers to share Internet access through a single, public Internet IP address.

Setup and use of the router is easy using Cisco Connect, the software that is installed when you run the included CD. Advanced configuration of the router is available through the provided web-based setup page.

For more wireless bandwidth, the router can create two simultaneous yet separate Wireless-N networks, one using the 5 GHz radio frequency band and one using the 2.4 GHz band. For example, use the Wireless-N 2.4 GHz network to surf, email, and print while keeping the less crowded, Wireless-N 5 GHz network free for time-sensitive traffic like Voice over IP (VoIP) calls, online gaming, and high-definition video. The Guest Access feature allows you to provide Internet access to guests visiting your home without granting them access to your local network.

Top panel of the Linksys E4200:

On the top panel of the Linksys E4200, the LED indicates the following:

Purpose	Light behavior	Activity
Power (white)	The light flashes slowly (every three seconds)	The router is powered on, resets to factory defaults, or upgrades its firmware
	The light is continuously lit	The router is ready for use
	The light flashes quickly (every second)	There is an error
Wi-Fi Protected Setup (white)	Light flashes slowly (every two seconds) for two minutes	Wi-Fi Protected Setup process is active
	The light is continuously lit	Wi-Fi Protected Setup is successful
	The light flashes quickly (every second) for two minutes	There is an error

Back panel of the E4200:

Ethernet 1-4 (yellow and green) These Ethernet ports connect the router to computers and other Ethernet network devices on your wired network using Ethernet cables (or network cables).

The yellow light flashes to indicate network activity over that port. The green light turns on when the local network port is connected to a 10/100/1000 Gigabit port.

Internet (yellow and green) Using an Ethernet cable (also called a network or Internet cable), the Internet port connects the router to your Internet connection, which is typically a cable or Digital Subscriber Line (DSL) modem.

The yellow light flashes to indicate network activity over that port. The green light turns on when the Internet port is connected to a 10/100/1000 Gigabit port.

Wi-Fi Protected Setup Button If you have client devices, such as wireless printers, that support Wi-Fi Protected Setup, then you can press the Wi-Fi Protected Setup button to automatically configure wireless security for your wireless network. To know how to connect devices using the WPS feature.

USB Port The USB port connects to a USB storage device. The USB 1.1 standard supports speeds up to 12 Mbps. The USB 2.0 standard supports speeds up to 480 Mbps. The Linksys E4200 Router recognizes USB 3.0 devices however it will force the device to run on 2.0 speeds.

NOTE: The newest firmware for E4200 supports connection to a USB printer. You will also need the latest version of Cisco Connect to be able to make use of the functionality. The firmware installs after a prompt upon running Cisco Connect. To learn how to download and install Cisco Connect. For instructions on how to connect a USB printer to your router using Cisco Connect.

Reset : This button allows you to reset the router to its factory defaults. Press and hold the Reset button for approximately five seconds. This button is located between the USB and Power ports. As an alternative, you can restore the defaults from the Administration > Factory Defaults screen in the router’s web-based setup page.

Power : The Power port connects to the included power adapter.

The E4200 has supplanted the E3000 as top model in the Cisco Linksys consumer router lineup. The E3000 now costs less and remains a viable option if you don’t need the extra wireless speed. See Linksys E4200 Review.

Other Wireless Router That You Might Be Interested:

Incoming Search Terms:

• cisco e4200
• ˼
• ciscoe4200buy com
• Cisco Linksys E4200
• CISCO
• e4200 cisco
• ciscoe4200
• 思科e4200
• CISCO-E4200
• sisco e4200